Team at Everest Drain & Plumbing are 100% Vaccinated and Compliant for COVID-19.  


Call Us

Sewage pump ejector installation by Everest pro!

A system which is designed to remove outflow of the solid waste from the toilet or sink drain is Septic Ejector pump. Mainly in the house with more bathrooms require this to remove the unwanted waste. And obviously, the commercial and industrial area needs it without any question.

To install this you require some expert to assist you because the plumbing might be complex and if some experts take this in their hand then they will do it better.

Everest Plumbing Dec 30, 2018
EVEREST DRAIN & PLUMBING - your local GTA Plumbing company since 2013Find a Plumber near you

Why use a sewage pump ejector?

If you install basement bathroom then you need to install Sewage Ejector Pump. Normally, the pipes are in the ceiling which is linked at the corner with other pipes to make sure that the flow of water and waste removal.

However, in the basement bathroom the sink, toilet, and shower are equipped below these pipelines due to which they necessarily perform without the boost pressure. This ejector pump makes sure that mortgagee won’t have to struggle on a sewage backup problems.

How to install the sewage pump ejector?

Before installing the sewage pump ejector you need some items for this. Piping materials, Submersible sewage pump, Sewage tank or basin large enough to hold the pump, Full-flow check valve, Float switch, and other Necessary tools.

Now start to install the pump. At first, determine the size of the pump and pick the required number of proper size pump for your sewage basin. After this secondly, locate the tank which collects the wastewater from the sewer line. Make a large hole or make a place by digging the floor which fits the tank completely and fit the pipelines and seals completely on the ground and buries it by using cement.

After this install and connect the pump in the basin to discharge the sewage to the sewage tank. and finally, adjust all the float switch and test the system by pouring water into sewage tank for many times. If it works properly then the system is properly installed.

Everest Drain & plumbing – Greater Toronto Area Plumbing Specialists - Plumbing service in Canada


Contact us


Awarded in 2021 for an Outstanding Toronto Plumber by Homestars

What if your system does not work properly?

After doing all the installation of the system, it does not work. Leakage from the basement and bad smells flow then what to do. Simple contact the best plumber to fix the problem.  Call Everest Drain and Plumbing plumbers for your help to install this sewage pump ejector.

You won’t have to regret by calling them for help. When a common man cannot do this the best experienced and knowledgeable plumber can fix this problem. Without any doubt, the plumbers of Everest will do the best job for your job which will last long.

Why Everest Drain & Plumbing Plumbers?

  • We are available 24/7 throughout the year and other staffs are just a phone call away even during holidays and festivals.
  • Our prices are affordable and upfront. Our Expert Plumbers rough estimate your costs so that it is upfront. We make any additional charge with your full consent if needed.
  • As the top plumbing and drain service providers, we use state-of-the-art technologies for efficiency and your convenience.
  • Our Plumbers have long-term solution-oriented problem-solving skills. You do not have to worry about a mediocre short-term remedy of your plumbing problems.
  • And finally, we as Everest Plumber follow all the code and regulations.

Additional information

It does not matter you are new or old client we give the same service for you. We can not go everywhere that’s why there are many branches of Everest Drain and Plumbing so choose the Everest Plumbers who are near your place so that the work can be done faster.

Stay Updated on Latest Plumbing service and Repair Tips