How to save water in Bathroom???

To save water in the bathroom

1. Water Saving While Bathing

When taking a bath, fill the tub only halfway to avoid water spilling over. Similarly, do not let the tap open if you are not ready to bath or rub your body. This can save the water bill in the long run.

The thing to remember while bathing:

• Prefer the showers than the normal bath.
• Check the temperature as you fill so you don’t need to add water at the end
• Fix an aerating shower head
• Use Gravity-fed showers

2. Check for Leaks

Leaks can happen anytime anywhere. So, it is essential to check water sources in the bathroom regularly for leaks and slow drips. Bathroom leaks seem to be easier to fix but it is not. If any leaking call to the plumber Toronto for the necessary aids.

3. Installing WaterSense Shower Heads

The plumber knows that Showerheads that are named as WaterSense are more water efficient than another showerhead. Thus, it is essential to keep an eye to install WaterSense shower heads.

4. While Brushing teeth

Always remember to turn off the tap while brushing. This could simply save up to six liters of water a minute.
It’s better to use a glass to hold a small amount of water for rinsing your mouth.

5. Flushing the toilet

Most modern toilets have a dual flush toilet cistern and these are water efficient.
If your toilet is older, you can reduce the amount of water used by fitting a Hippo or Save-a-Flush device. These are simple devices which reduce the capacity of the toilet cistern, therefore, using less water for each flush.

If you follow the above ideas into practice, you will surely save the water in the bathroom.

IF you have any types of plumbing and drain needs, call us right Now 416-383-7378